INFORMATION
Teledyne Odom Echotrac CV100
Multiple time varied gain (TVG) curves (10, 20, 30, and 40 log)
• DSP digitizer with manual filter control
• Manual or auto scale changes (phasing)
• Calibration menu with controls for transducer draft and index
plus sound velocity and bar depth controls
• Rugged and waterproof (IP65)
• Help menus
• Flash memory upgradeable
• Auto Gain and Auto Power Modes for minimal operator input
• Suitable for autonomous vessels
Single Channel Configuration1 High: 100kHz-750kHz (manual tuning in 1-kHz steps)
Low: 3.5kHz-50kHz (manual tuning in 1-kHz steps) variable receiver bandwidth
Dual Channel Configuration High: 100 kHz-340kHz
Low: 24 kHz-50kHz
Resolution 0.01m, 0.1 ft.
Accuracy (corrected for sound velocity) 200kHz-0.01 m +/- 0.1% depth
33kHz-0.10 m +/- 0.1% depth
Output Power Up to 300 watts RMS
< 1 watt minimum
Ping Rate Up to 20Hz in shallow water (10m) range
Depth Range From <30cm to 600m (depending on frequency and transducer selected)
Input Power Requirement 9-32VDC < 15 watts
Weight 5kg (11lbs)
Dimensions 28cm W (11 in) x 23cm H (9 in) x 11.5cm (4.5 in) D
Mounting Desktop or bulkhead mount (fixing hardware included)
Ports/Interface Ethernet (LAN) plus
4 x RS232 or 3 x 232 and 1 x RS422
Inputs from external computer, motion sensor, sound velocity
Outputs to external computer or remote display
Output string: Odom Echotrac SBT, NMEA DBS, NMEA DBT, DESO 25
Heave Input-TSS1 or “Sounder Sentence”
Echotrac Control SW – Simple Windows compatible graphical user interface
Storage of full ping to seabed data in DSO format with e-Chart
(easily compressed or converted to .XTF for additional processing)
Environmental Operating 0-50°C
Storage -20°-70°C
Options Heave Sensor
Software Control & Logging Software Windows based software included: eChart Display